 Description
Manually or mechanically controlled hydraulic distributor Р35 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). Relief valve is integrated therein. 
Technical Parameters
Ambient temperature -40C...+60C
Hydraulic liquid -mineral oil based/hydraulic oil Viscosity 12 ...800 mm2/s Fluid temperature -15C...+80C Filtration 10 to NAS 1638 Max operating pressure, P=250; T=50 bar A , B = 300 bar Nominal flow 35 l/min Leakage 10-15 cm3/min at 120 bar Construction
Р35 is a monoblock distributor. Its body is made of cast iron СЧ30. Spool is made of carburized steel with hard chrome plating. Mounting
The distributor is fixed with 2 bolts M8
Directional control valves are one of the most fundamental parts in hydraulic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a piston inside a cylinder which is electrically controlled. The movement of the cylinder restricts or permits the flow, thus it controls the fluid flow.
Directional control valves are mainly two types:
* Hydraulic and
* Pneumatic.
Hydraulic directional control valves are for a liquid working fluid (e.g. water, hydraulic oil) and pneumatic directional control valves are for a gaseous (usually air) working fluid.
|
